Instruction manual

10
Calibrating Datavideo Monitors
Perhaps the most important way to make sure that your video really looks as good as it can on
other monitors is to monitor the video during production with a properly calibrated monitor.
For guidance on how to calibrate a Datavideo Monitor using SMPTE colour bars please visit
our website http://www.datavideo.info/en/faq.php
Specifications
Interface
2x HD/SD-SDI input (SMPTE 272M-C 1.5Gbps, 270Mbps with Embedded
Audio)
2x Component Y.U.V Sony Betacam Specification
2x CV input
2x HDMI input
2x D-Sub 15 Pin Plug (Tally Light Signal)
HD/SD-SDI
Spec
SDI/HD-SDI Specifications
Standard SMPTE 259M-C (270Mbps - 525/625 Component Video) and
SMPTE 292M (1.485/1.001 Gbps)
Connector BNC (IEC 169-8)
Impedance 75 Ω
Return Loss HD > 15 dB (5 MHz to 750 MHz)
> 10 dB (750 MHz to 1.5 GHz)
SD > 15 dB (5 MHz to 270 MHz)
Equalization 200 m Belden 8281 cable at 270 Mbps; 100 m (typical) of
Belden 1694A at 1.485 Gbps
CV Spec
Bandwidth: > 5.0MHz
Differential of Gain (DG) ＜3％
Differential of Phase (DP) ＜3°
S/N: > 50 dB
YUV Spec
Bandwidth: > 5.2MHz
Differential of Gain (DG) ＜3％
S/N: > 50 dB
HDMI
Supports HDMI 1.1
Operating
Temperature
0°C to 40°C (32°F to 102°F)
Humidity
10% to 90% (non condensing)
Dimension &
Weight
485mm (W) x 135mm (H) x 75mm (D) / 2.2Kgs
Power
DC 12V / 2A