2 x 7" TFT LCD MONITOR TLM-702HD Instruction Manual Rev 150310 www.datavideo-tek.
Table of Contents Warnings and Precautions ......................................................................................................... 3 Warranty ..................................................................................................................................... 4 Standard Warranty .................................................................................................................. 4 Two Year Warranty ...............................................................
Warnings and Precautions 1. Read all of these warnings and save them for later reference. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this unit in or near water. 5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage. 6.
Warranty Standard Warranty Datavideo equipment is guaranteed against any manufacturing defects for one year from the date of purchase. The original purchase invoice or other documentary evidence should be supplied at the time of any request for repair under warranty. Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered by this warranty. All mail or transportation costs including insurance are at the expense of the owner.
Introduction The Datavideo TLM-702HD is a 19” rack mountable dual 7” TFT Monitor. The all metal construction makes the TLM-702HD robust and durable, and the 12V DC power requirements make it easy to power in the field. The high resolution TFT screens have a wide viewing angle and feature NTSC / PAL auto detection.
Connections & Control Front Panel Power Switch Switches the power On / Off. Stereo Headphone Mini Jack socket The level is adjusted by headphone volume control. Listen to embedded audio from HDMI or SDI sources. Headphone Volume Control Allows you to adjust the headphone volume. Source Button Select Input source between SDI, YPbPr, CVBS, and HDMI. Aspect Ratio Button Sets the LCD aspect ratio to 4:3, 15:9, or 16:9 PATTERN The PATTERN button will generate colour bars on the screen.
Rear Panel HD/SD - SDI input BNC connector for SDI Input. YUV input BNC connectors for analogue (Component) video inputs. Composite Video input BNC connector for analogue (Composite) video inputs. HDMI in interface HDMI digital signal input connecter. Supports HDMI 1.1 Tally In Send in red and yellow colour tally signal to tally LED. Red means on-air, yellow means standby. DC in socket Connect the supplied 12V 2A PSU to this socket.
Menu Options 1. Picture - Press the MENU button once to display the Picture setting menu. - Press the ENTER button to highlight the Brightness setting. - Press the UP or DOWN button to highlight the setting that needs to be adjusted. - Press ENTER button to select the Brightness setting. - Press the UP or DOWN button to adjust the Brightness value between 0 and 100. - Press ENTER button again to save and return to the Picture setting menu; now highlight another Picture setting to be adjusted.
- Press the ENTER button to display the OSD Blending setting position. - Press the UP or DOWN button to select the OSD blending value (from 0~7). NB: OSD Blending value 0 = Min transparency 7 = Max transparency - Press the ENTER button to save the OSD blending value. - Press the UP or DOWN button to highlight the Time Code setting. - Press the ENTER button to toggle the on screen Time Code display ON/OFF. - Press the UP or DOWN button to highlight the TC Position setting.
Calibrating Datavideo Monitors Perhaps the most important way to make sure that your video really looks as good as it can on other monitors is to monitor the video during production with a properly calibrated monitor. For guidance on how to calibrate a Datavideo Monitor using SMPTE colour bars please visit our website http://www.datavideo.info/en/faq.php Specifications Interface 2x HD/SD-SDI input (SMPTE 272M-C 1.5Gbps, 270Mbps with Embedded Audio) 2x Component Y.U.
Service & Support It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setting up and operating your system. Please refer to our web site www.datavideo-tek.com for answers to common questions, support requests or contact your local office below. Datavideo Global Website: www.datavideo-tek.com Datavideo Corporation Tel: +1 562 696 2324 Fax: +1 562-698-6930 E-Mail: contactus@datavideo.
