8 WAY INTERCOM TALK BACK SYSTEM ITC-100 Instruction Manual w w w. d a t a v i d e o .
INTERCOM TALK BACK SYSTEM Welcome to the ITC-100 Instruction Manual Thank you for choosing a Datavideo product, please visit the support pages on our website for the latest version of the instruction manual. http://www.datavideo.
ITC-100 Contents Warnings and Precautions 3 Welcome to the ITC-100 Instruction Manual 4 Warranty 4 Standard Warranty 4 Two Year Warranty 4 Disposal 4 Packing List 5 Features 5 Product Overview 5 Base Unit Front Panel 6 Base Unit Rear Panel 6 Connections and Controls Panel 6 ITC-100SL Belt Pack 8 Cable Assignments Headset, Jack plug and 5pin XLR 9 Pin Assigment for ITC-100 XLR Cable 9 ITC-100SL Belt pack 3.
INTERCOM TALK BACK SYSTEM Warnings and Precautions 1.Read all of these warnings and save them for later reference. 2.Follow all warnings and instructions marked on this unit. 3.Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a slightly damp cloth for cleaning. 4.Do not use this unit in or near water. 5.Do not place this unit on an unstable surface, cart, stand, or table. The unit may fall, causing serious damage. 6.
ITC-100 Packing List Product Overview Item 1 2 3 4 5 6 7 Description ITC-100 Base Unit ITC-100SL Belt Packs ITC-100SL Carry Cases CB-3 20m Cables 5pin XLR to XLR MC-1 Starter Headset with microphone TD-2 on-camera Tally LED Indicators MC-2 XLR Gooseneck Microphone Qty 1 4 4 4 4 1 1 8 9 10 11 LP-1 XLR Gooseneck Light 12V / 1A Power Supply Unit CB-17 17cm Earphone cable ITC-100 Instruction Manual 1 1 4 1 The ITC-100 is a 19” Rack Mount 8 Way Intercom / Talkback System.
INTERCOM TALK BACK SYSTEM Base Unit Front Panel POWER ON/OFF SWITCH HEADPHONE SOCKET CALL BUTTONS 1~8 PLUS CALL ALL VOLUME CONTROL CALL CONDENSER MIC 2 3 XLR/ 1/4" MICROPHONE INPUT WITH DYNANAMIC/ CONDENSOR SWITCH LIGHT 12V MUTE 5 HEADPHONE SPEAKER MUTE 4 ALL DYNAMIC POWER VOLUME 1 MIC MODE 12V LIGHT SOCKET 6 7 8 MIN MIC/ HEADPHONE MAX ITC-100 MUTE BUTTON MIC/HEADSET SOCKET 8 WAY INTERCOM SYSTEM BUILT-IN SPEAKER Base Unit Rear Panel CHANNEL 1~4 XLR INPUT/ OUTPUT SOCKETS T
ITC-100 XLR Microphone Socket MIC MODE Combined XLR / ¼” (6.3mm) Jack Microphone Input for either a Condenser or Dynamic Gooseneck Microphone. XLR supports Condenser Microphones ¼” (6.3mm) Jack supports Dynamic. DYNAMIC CONDENSER MIC Headphone Socket ¼ “ / 6.3mm Stereo Headphone Socket for conventional headphones. Plugging in headphones will disable the built-in speaker Microphone / Headset Socket 3.5mm Stereo Socket for combined Microphone Headset.
INTERCOM TALK BACK SYSTEM ITC-100SL Belt Pack BASE SIDE TOP Bi-Color Tally LED TALLY CALL Call Button TALK Volume Control Talk Button ITC-100SL VOL OFF TO MASTER UNIT XLR Connection Mic/ Headphone Socket EXT TALLY LED POWER XLR Connection Connects the ITC-100SL to the ITC-100 Base Unit. Power, tally and bi-directional audio are all carried through the same CB-3 cable. Sends a paging message to the ITC-100 Base Unit.
ITC-100 Cable Assignments Headset, Jack plug and 5pin XLR Please Note: If you only want to extend the reach of the ITC-100SL Belt Pack cabling then Datavideo already sell pre-manufactured XLR cabling for doing this in 20m (CB-3) and 50m (CB-4) lengths. Please ask your local dealer for price and availability of additional CB-3 and CB-4 cables.
INTERCOM TALK BACK SYSTEM Using the ITC-100 with the SE-500 The ITC-100 is an ideal accessory for the Datavideo SE-500 Video Mixer. The SE-500 has four channels, each channel can connect to the ITC-100SL. By using Datavideo G07690150018 cable, the Tally output from the SE-500 connects to the ITC-100 Tally Input A. Tally Input A provides tally information to channel 1 ~ 4.
ITC-100 Using the ITC-100 with the SE-2000 The ITC-100 is an ideal accessory for the Datavideo SE-2000 Video Mixer. The SE-2000 has four channels, each channel can connect to the ITC-100SL. By using Datavideo G07690150018 cable, the Tally output from the SE-2000 connects to the ITC-100 Tally Input A. Tally Input A provides tally information to channel 1 ~ 4. When the camera is live the cameraman will see a tally light in red, when the camera is cued up, the cameraman will see a tally light in amber.
INTERCOM TALK BACK SYSTEM Using the ITC-100 with the SE-2800 The ITC-100 is an ideal accessory for the Datavideo SE-2800 Video Mixer. The SE-2800 has eight channels, each channel can connect to the ITC-100SL. By using Datavideo G07690250002 cable, the, the Tally output from the SE-2800 connects to the ITC-100 Tally Input A & Tally Input B. Tally Input A provides tally information to channel 1 ~ 4, Tally Input B provides tally information to channel 5 ~ 8.
ITC-100 Using the ITC-100 with the SE-3000 The ITC-100 is an ideal accessory for the Datavideo SE-3000 Video Mixer. The SE-3000 has sixteen channels, each channel can connect to the ITC-100SL. By using Datavideo G07690370003 cable, the Tally output from the SE-3000 c o n n e c t s t o t h e I T C - 1 0 0 Ta l l y I n p u t A & Ta l l y I n p u t B , a n d a l s o c o n n e c t s to the ITC-200E Tally Input C & Tally Input D.
INTERCOM TALK BACK SYSTEM ITC-100 Tally Input - Pin Cross Reference If you are using the ITC-100 with a Datavideo product you do not need to worry about tally information, as it is automatically sent to the ITC-100. If you are using the ITC-100 with other equipments the following tables may help explain the pin configurations of the ITC100 Tally A and Tally B input. Contact closure between the relevant Pin number and ground will illuminate the Tally LED.
ITC-100 Specifications ITC-100 Base Unit Specification INPUTS / OUTPUTS WEIGHT 12V / 1A (8W) 2 x 15 Pin D-Sub Sockets for Tally A and Tally B 3.5mm Stereo Jack Socket for combination Headphone / Microphone Headset Impedance 8~600 ohms 100mW(min) ¼” (6.3mm) Stereo Headphone Socket Headset Impedance 8~600 ohms 100mW(min) 3 pin XLR connector. Pin2: 12V, Pin3: GND. Light power consumption 12V/100mA(max). 3 Pin XLR / ¼” (6.
Service & Support It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setting up and operating your system. Please refer to our web site www.datavideo.com for answers to common questions, support requests or contact your local office below. Datavideo USA Datavideo The Netherland Datavideo Corporation 7048 Elmer Avenue. Whittier, CA 90602, U.S.A. Tel:+1-562-696 2324 Fax:+1-562-698 6930 E-mail:sales@datavideo.
