User Manual

DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 06112019
11
4. Select “Active/Inactive” to activate for remaining parameters as required.
5. Select “Save and Confirm” to save all changed parameters.
6. Select “Apply” in the pop-up window.
IP Streaming Setup
Streaming Setup Page of DT-IPTV-QAM-ASI-4HC
Enabling IP Streams
1. Enable the Stream by selecting the check box 1-4.
Note: All streams can be enabled at the same time by using the “master” checkbox.
2. Enter the stream Destination IP [example: udp://224.1.1.4:1234].
3. Set the TTL value.
4. Select ‘Save and Confirm’ once all the streams are setup.
Disabling IP Streams
The DT-IPTV-QAM-ASI-4HC offers the user a SPTS output stream.
Each Stream can be disabled as required.
To disable an IP Stream “uncheck” the checkbox in front of the
appropriate IP Stream_ID (1-4).