User Manual

DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 06112019

Encoder Setup Page of DT-IPTV-QAM-ASI-4HC

Encoder Setup page allows the integrator to select and set the parameters needed for each stream.

1. Select the “Edit” Icon:

2. Select and set the specific parameters settings as required.

Note: you can select and set all the parameters for all the encoders at one time.

3. After setting all the required parameters- Select the edit icon again.

Note: All changed parameters will be shown in red. Pictured Below.