Specifications

 2001 Microchip Technology Inc. DS00104F-page 4-29
Gang
Programmers
4
Gang
Programmers
4
Gang
Programmers
4
Gang
Programmers
4
Gang
Programmers
4
Unitec Electronics
Company Ltd.
Pim/10A
Features:
• Can write 10 devices at once
• Programs all four PIC16C54, PIC16C55,
PIC16C56 and PIC16C57 devices
• One-touch programming
• Ten 28-pin DIP socket
(18- to 28-pin devices)
• 20 x 2 Liquid Crystal Display
• Code protect selection capability
• 12V DC, 2.0A power supply
• Stand-alone capability
(download from master device)
• PC Host Mode-IBM
®
and NEC98
compatibility
• Serialization capability in Host Mode
• Can Verify V
DD voltage from
2.0V (V
DD_MIN) to 6.5V (VDD_MAX)
Contact:
Unitec Electronics Co., Ltd.
Office:
886-2, Nihongi, Nakago-Mura,
Nakakubiki-Gun, Niigata 949-23
Japan
TEL: [phone]
FAX: [phone]
Tokyo Office:
Mitinoku Building 4F
4- 9, Kanda Sakuma-Cho,
Chiyoda-Ku, Tokyo 101
Japan
TEL: [phone]
FAX: [phone]
Product Information:
This product is a programmer for Microchip Technology
PIC16C54, PIC16C55, PIC16C56 and PIC16C57
EPROM microcontrollers. Capable of programming up to
10 devices at once, with or without code protection.
Data to be programmed is typically READ from a single
master device. In addition to reading and programming the
device, it can also perform blank checks and code
verifications. Blank check plus programming followed by
verification can all be performed in a single keystroke. The
display allows for easy identification of programmer
operation and any error conditions. Additionally, each
programming socket has its own red LED to clearly show
which, if any device did not program properly. In Host
Mode (RS-232C), additional functions include
microcontroller serialization, program code upload/
download, as well as programming pass/fail counters.