Specifications

DS00104F-page 4-28  2001 Microchip Technology Inc.
System General
Corporation
Turpro-848 Gang
Programmer
• Gang Programmers supporting EPROM/
EEPROM/FLASH/Microcontrollers
• Two Embedded CPU and Turbo Mapping
Technology
• Socket adapter for DIP, PLCC, PSOP,
TSOP, VSOP and other device packages
• Adapter support for PIC12C508,
PIC16C54, PIC16C, PIC16C55,
PIC16C56, PIC16C57, PIC16C84 on DIP
package
• Adapter support for PIC16C6XX and
PIC16C7X on DIP package
• Supporting 5.0V, 3.3V, 3.0V, 2.7V, 1.5V
low-voltage device
• Control Mode: stand-alone operation and
computer remote control
• Device Insertion Check: backward device
check, device inserted position check
• Free software updates through Web site.
Contact:
System General Corp.
1603A S. Main Street
Milpitas, CA 95035
TEL: [phone]
[phone]
FAX: [phone]
BBS: [phone]
email: [e-mail]
web: www.sg.com.tw
3F, No.1, Alley 8, Lane 45
Bao Shing Road, Shin Dian
Taipei, Taiwan
TEL: [phone]
FAX: [phone]
Product Information:
Turpro-848 Gang System Programmer with quality
ensured by ISO9001 certification, this system comes with
complete device supports for EPROM, EEPROM and
FLASH EPROM. It also programs 87/89 series MPU and
Microchip Technology PICmicro
®
microcontroller (MCU)
devices up to eight pieces at a time.
Turpro-848 also has the socket adapter to match DIP,
PLCC, TSOP, PSOP, VSOP or other packages. And the
Turpro-848 uses a dedicated CPLD on each socket for
circuitry isolation. As such, a programming failure on one
socket will not affect the programming on others. In
addition, a proprietary mapping technology controlled by
an advanced dual CPU system ensures accurate pulse
width and fast programming speed on each socket.
Turpro-848 has all the features designed to fit your
production requirement. It can be operated as a stand-
alone unit or can interface with a PC under DOS
™
or
Windows
®
environment for remote operations. An optional
parallel interface is available to facilitate high-speed file
downloading. The Marginal Test allows you to verify the
programmed devices against a user-defined voltage
range and disqualify marginal devices before they reach
the board level. The unique “Auto-Sense” function will
sense the inserted device and program the device without
touching any key. To update the system, simply reprogram
the embedded FLASH device. The updates are free!