Specifications

DS00104F-page 4-16  2001 Microchip Technology Inc.
ProgRama Tools
ChipBurner TRACKCels
Features:
• Choose from the largest selection of
TRACKCels to support virtually every
technology on the market today regardless
of packaged type
• Low-cost solution to today's gang/set
programming needs
• Wholly versatile through readily achievable
selective customization
• Mix and match TRACKCels for technology
and package support
• Ultimate expandibility – as requirements
change simply plug in a new TRACKCel
• ElectroSense socket isolation circuitry
• Power failure device protection: a power
failure will not damage device(s) while
installed in TRACKCel
Contact:
ProgRama Tools
3500 NW Boca Raton Blvd.
Bay 501-506
Boca Raton FL 33431
TEL: [phone]
561-338-8843
FAX: [phone]
email: supportprogramatools.com
web:
www.programatools.com/programa.htm
Product Information:
The ChipBurner family of device programmers is wholly
versatile through readily achievable, selective
customization incorporating proprietary “Multi Track”
design. Each TRACKCel supports eight individual
programming sites each. The unlimited expandibility of
this open architecture allows true flexibility by allowing you
to mix and match TRACKCels. This provides a low-cost
solution to today's gang/set programming needs.
Purchase the support you need now, then later simply
plug in another TRACKCel to accommodate future
requirements. The ChipBurner family includes the
following low cost models:
ChipBurner-Gang 8 supports
(1) TRACKCel (to 8 devices)
ChipBurner-Gang 16 supports
(2) TRACKCels (to 16 devices)
ChipBurner-Gang 32 supports
(4) TRACKCels (to 32 devices)
The ChipBurner-Gang 32 is the first production
programmer to support 32 devices at a time with
combinations of four package types or technologies by
supporting four different TRACKCels. The mix n' match
capabilities do not simply end there, the TRACKCels are
even capable of programming these different package
types all with different data, and all at once.These
removable TRACKCels support virtually every technology
on the market today. Choose from the largest selection of
TRACKCels from the world's largest manufacturer of low-
cost gang production programmers.
The entire line of TRACKCels employ Electrosense
®
socket isolation circuitry which prevents defective devices
from destroying any other device which is being
concurrently programmed. The TRACKCels also feature
high-quality sockets that are mounted directly to the
embedded circuit board, providing absolute mechanical
stability. All products are manufactured and serviced in the
USA.