User manual

Tasks and Kits
3-12 ProMaster 2500 User Manual
The
Placement
parameter (
Label placement
) controls the location of the
label on the device. TaskLink’s default is
Autocenter
(numeric value of
255 in this field), which instructs the 2500 to position the label in the center
of the device package. A placement value of 0 (zero) places the left end on
the label on the left end of the device’s leading edge. Increasing the
placement value by one moves the label 0.010 inch away from the leading
edge of the device.
Press
T
AB
to move the screen cursor over the
<OK>
pushbutton. Press
↵
to save the changes made in this dialog box. TaskLink returns to the
Edit
Task
screen.
This is the last mandatory field definition. While there may be several
other parameters that you will always change from the default setting,
the Task now has the minimum number of fields it needs to run and
process devices. It is important that you save these settings before leaving
the Task-creating portion of TaskLink.
Saving the Task
Press
T
AB
to move the screen cursor to the
<Save>
and press
↵
. TaskLink
returns to the Add Task dialog box. The new Task name and description
appear in the Task list and the cursor is in the Task Name entry field,
ready to create the next Task.
The process of creating a basic Task for a Logic device is complete when
parameters for all the mandatory fields have been entered. The Task will
run and program devices. Other non-mandatory logic parameters that
can further define the Task are described in the next section.
Other Logic
Parameters
To select other logic parameters from the
Edit Task
screen, select
<MORE...>
and then
Logic Parameters...
Figure 3-9
Logic Device Parameters