User manual

Tasks and Kits
3-6 ProMaster 2500 User Manual
You may also wish to enter such handler setup parameters as blank check
number, programming module and configuration, label size, and
sumcheck (for example,
AMD 22V10/4 20R-2 0906K S/C 0000)
.
Selecting a Device
From the
Edit Task
dialog box, create a list of devices that operators
choose from when they run the Task. A maximum of five devices can be
selected for each Task.
You can use either of the following two device selection methods to
create a Task-specific device list.
•
Wild card device selection
—Allows you to use standard PC
wildcard options to have TaskLink display a list of parts with similar
core numbers. For more information on using wild card selection,
refer to the Task Device Type(s) topic in the
General Help Index
in
the
Help
menu or press
F1
for the online help text.
•
Device list selection
—Choose device names as they appear on the
device list (including Keep Current and Extended Algorithms). A list
box displays manufacturers names. After a manufacturer is chosen,
the box displays a list of device part numbers.
The most common method is specifying device names using the name
shown on the 2500’s Device List. TaskLink will display those devices on
the screen for you to select.
Press
T
AB
to move the screen cursor to the
Device(s)
field. Press
F2
. The
Select Device
dialog box appears with the cursor in the
Device Type
field. Press
T
AB
to move to the
Manufacturers
parameter entry field, and
use the arrow key to move the screen cursor to highlight the desired
device manufacturer.
Press
T
AB
to move to the
Devices for ...
parameter entry field, which
displays a list of supported devices by part number. Highlight the
desired device. Press
↵
to select the device. TaskLink returns to the
Device(s) entry field in the Edit Task dialog box and displays the part just
selected.
Figure 3-4
Edit Task Dialog Box