User manual

Installation and Setup
2-4 ProMaster 2500 User Manual
• An input air line (6 ft) with a male 1/4-inch NPT adapter on one end
• Two male quick connects with female 1/4-inch NPT adapter on one
end
•Label roll
•Chuck set
•Spares Kit
•Power cord
•
ProMaster 2500 User Manual
with End User Registration Card
• Customer letter
Installing the 2500
This section describes installing various components on the 2500 to
prepare it for operation. Power to the 2500 should be off during these
steps.
Selecting the Correct
Adapter
Perform the following procedure to determine which of the two male
quick connects provided with the system is correct for the female quick
connect on your source air line.
1. Turn the external air source off so the source air line is not
pressurized.
Figure 2-3
System Contents
PROMASTER 2500
DISKS
POWER CORD
USER
MANUAL
1763-3
RS-232 CABLE (2)
ProMaster 2500
TASKLINK
DISK
LABEL
ROLL
1/4" INPUT AIR LINE
(With 2 adapters)
PROGRAMMING
MODULE
9 - 25 PIN
CABLE
SPARES KIT
CHUCK SET