User manual

Index
ProMaster 2500 User Manual Index-5
Labels
adjusting, 5-25
calibrating, thermal printer, 4-22
calibration, 2-24, 5-25
calibration value firmware key, B-4
compatibility, 4-18
delete files, B-2
loading, 4-18
loading, dot matrix printer, 2-9, 4-18
loading, thermal printer, 2-13, 4-20
part number location, 4-18
position on device, 2-25
print position, 2-24
Labels not calibrated, press start message, 6-3
LCD display, 1-11
Lead screw
lubrication, 5-62
replacement, 7-23
Left lead screw bearing assembly, replacing, 7-23
Loading RAM from a master device, 3-7
Local mode
function key, B-2
general description, F-1
General Setup menu, F-9
how to select, 2-20
programmer port baud rate, F-9
remote port baud rate, F-9
setting audible alarm, F-9
System Setup menu, F-9
Logging statistics, 3-19
Logic parameters, TaskLink screen, 3-12
Low air pressure, setting, 4-17
Lubricating beam lead screw, 5-62
M
Main fuse, replacing, 7-2
Main menu, 1-11
Maintenance intervals, 5-55, 5-67
Maintenance, daily, 5-56
Mark, delete files, B-2
Mass Storage Module (MSM)
definition, 5-19
enable option in TaskLink, 3-31
Master device
loading, 4-26
loading into RAM, 3-7
Menu
Diagnostics, 5-30
General Setup, F-9
Main, 1-11
System Setup, F-9
Message editor (used with Kits), 3-35
Message line, 1-13
Messages, 6-1—6-5
Microswitches, theory of operation, 5-7
Modes of operation (operator), 1-12
Modes, switching between local and remote, 2-20
Motor
changing speed, B-3
fuses, 5-13
test, 5-40
MSM (Mass Storage Module), 5-19
N
Noise level, precautions, 4-4
Non-blank
error, 5-5
message, 6-3
O
Online help, 1-14
Operating position, hood, 1-3
Operating temperature range, 2-2
Operation
modes, 1-12
theory of, 5-2
Operation, local mode
Label Only, F-2
Print Only, F-6
Purge, F-6
Optic holes, cleaning, 5-56
Optics
ADC, 5-7
adjusting ADC, B-2
general description, 1-7
label sensing, 5-7
positioning, 5-7
super optic collector, A-5
table, 5-32
test, 5-31
theory of operation, 5-7
track, 5-7
wire color, 5-7
Options, spares kit, 1-19