User manual

Local Mode
ProMaster 2500 User Manual F-9
System Setup Menu
There are three submenus under System Setup.
General Setup Menu
General setup allows you to change the port settings and choose to turn
the audible alarm on or off. The access these from the 2500 Main Menu,
press
3
to select SYSTEM SETUP.
The 2500 displays:
Press
1
to select the GENERAL SETUP MENU.
Audible Alarm
If the Audible Alarm is enabled, a tone is emitted for every keystroke and
error message. To enable or disable the Audible Alarm, press
1
from the
General Setup Menu. If the alarm is currently enabled, the 2500 displays:
If it is disabled, ON appears instead of OFF. Press
Y
if you wish to toggle
to the other state.
Remote and
Programmer Baud
Rates
To change the baud rate on the Remote Port, press
2
. The 2500 displays:
Press the number corresponding to the baud rate you want to use.
Change the baud rate on the Programmer Port in the same way by
pressing
3
. The 2500 displays:
Select the number next to the baud rate you want to use.
To return to the Main Menu, press
RESET
.
* * PROMASTER 2500 MAIN MENU * *
ENTER THE NUMBER OF THE DESIRED FUNCTION
1 - OPERATIONS 3 - SYSTEM SETUP
2 - FILE UTILITIES 4 - DIAGNOSTICS
* * * SYSTEM SETUP MENU * * *
1 - GENERAL 4 - MAIN MENU
2 - LABELER
3 - HANDLER
* * * GENERAL SETUP MENU * * *
1 - AUDIBLE ALARM 4 - SETUP MENU
2 - REMOTE BAUD RATE
3 - PROGRAMMER BAUD RATE
DO YOU WANT AUDIBLE ALARM OFF?
(Y OR N):
ENTER NUMBER OF REMOTE BAUD RATE
DESIRED (X):
1 - 1200 2 - 2400 3 - 4800 4 - 9600
5 - 19200 6 - 38400
ENTER NUMBER OF PROGRAMMER BAUD RATE
DESIRED (X):
1 - 1200 2 - 2400 3 - 4800 4 - 9600
5 - 19200 6 - 38400