User manual

Local Mode
F-6 ProMaster 2500 User Manual
Print Only
The Print Only feature enables you to check the position of text on the
label by printing a label without applying it to a device. To use this
feature, perform the following procedure.
1. Press
1
from the Main Menu to select OPERATIONS. The 2500
displays:
2. Press 5 to select PRINT ONLY. The 2500 displays:
Select the file name and press
ENTER
to select it.
3. Select a file to print and press
ENTER
to select it. The 2500 displays:
4. Press
START
to print a label. Catch the label with your finger. Press
RESET
to return to the Main Menu.
Purge
The Purge feature allows you to cycle devices through the system
without programming or labeling them. Use this mode to remove
unwanted devices from the system.
File Utilities Menu
The File Utilities allow you to create, edit, or delete files. From the 2500
Main Menu, press
2
to select FILE UTILITIES. The 2500 displays:
Edit Files
To create and edit files, press
1
. The 2500 displays:
Note: Pressing
RESET
cancels the operation and returns you to the Main
Menu.
* * * OPERATIONS MENU * * *
1 - PROGRAM/TEST & LABEL 4 - LABEL ONLY
2 - LOAD MASTER 5 - PRINT ONLY
3 - PROGRAM/TEST ONLY 6 - PURGE
PRINT LABEL
TEMPORARY FILE1 FILE2 FILE3
FILE4 FILE5 FILE6 FILE7
ENTER FILE NAME:
PRINT LABEL TEMPORARY FILE
AUTO-SEL 26 CPI 26 CPI S 20 CPI
16 CPI T 12 CPI T 18 CPI
MOVE TO SELECTION THEN PRESS ENTER
PRINT LABEL FILE NAME: FILE5
PRESS START TO PRINT
A LABEL
* * * FILE UTILITIES MENU * * *
ENTER THE NUMBER OF THE DESIRED FUNCTION
1 - EDIT FILES 3 - MAIN MENU
2 - DELETE FILES
FILE EDIT MODE
FILE1 FILE2 FILE3 FILE4
FILE5 FILE6 FILE7 FILE8
ENTER FILE NAME TO EDIT: