User manual

Introduction
ProMaster 2500 User Manual 3/97 1-19
Safety (CE units only)
The ProMaster 2500 meets essential health and safety requirements and
conforms to the following European Community (CE) directives:
• Machinery Directive 89/392/EEC
• Electromagnetic Compatibility Directive 89/336/EEC
• EN 292-1,2—Safety of Machinery
• EN 60204-1—Safety of Machinery (Electrical Equipment of Machines)
Certificate of RFI/EMI
Compliance (CE units)
Data I/O certifies that the ProMaster 2500 complies with the Radio
Frequency Interference (RFI) and Electromagnetic Interference (EMI)
requirements of EN55011 Class A, IEC-801-2, -3, and -4, as called out in
89/336/EEC, the EMC directive for the European Community.
WARNING:This equipment is a class A product. In a domestic
environment this product may cause radio interference in
which case the user may be required to take adequate
measures.
Options
Optional Spares Kit
In addition to the Standard Spares Kit included with your ProMaster
2500, an Advanced Spares Kit is available. This kit includes larger
assembly items such as the power supplies, front panel, programming
electronics boards, and controller boards. This kit must be purchased as a
separate item from the Standard Spares Kit.
Keep Current
Subscription Service
Data I/O provides a one-year subscription to keep the 2500 and its
documentation up-to-date with the latest features and device support.
This subscription also incorporates manufacturer-recommended changes
to existing device support for maintaining optimum yields, throughput,
and long-term reliability.
The service includes immediate access to new and updated programming
algorithms via our Keep Current Bulletin Board System (BBS)—before
the algorithms are available in the update kit. Keep Current algorithms
are also available on the Data I/O Home Page on the World Wide Web at
http://www.data-io.com
.
For more information, contact Data I/O Corporate Sales at 800-332-8246.
88-pin Upgrade
An upgrade is available to convert 44-pin programming electronics to 88-
pin capacity to program devices with a higher pin count. Contact
Data I/O Service at 800-735-6070 for more information on this upgrade.
Service Contracts
For information on service contracts, contact Data I/O Service at
800-735-6070.