User manual

Translation Formats
D-2 ProMaster 2500 User Manual
Below you will find a list, in ascending numerical order, of all the
translation formats supported by the programmer. Following the list is a
description and, in most cases, an example of each translation format,
presented in order by format number.
* This alternate code is used to transfer data without the STX start code and the ETX end
code.
** This alternate code is used to transfer data using the SOH start code instead of the
usual STX.
Format Code Format Code
ASCII-BNPF 01 (05*) Fairchild Fairbug 80
ASCII-BHLF 02 (06*) MOS Technology 81
ASCII-B10F 03 (07*) Motorola EXORcisor 82
Texas Instruments Intel Intellec 8/MDS 83
SDSMAC (320) 04 Signetic Absolute Object 85
5-level BNPF 08 (09*) Tektronix Hexadecimal 86
Formatted Binary 10 Motorola EXORmacs 87
DEC Binary 11 Intel MCS-86 Hex Object 88
Spectrum 12 (13*) Hewlett-Packard 64000
Absolute 89
POF 14
Absolute Binary 16 Texas Instruments
LOF 17 SDSMAC 90
ASCII-Octal Space 30 (35**) JEDEC format (full) 91
ASCII-Octal Percent 31 (36**) JEDEC format (Kernel) 92
ASCII-Octal Apostrophe 32 Tektronix Hexadecimal
ASCII-Octal SMS 37 Extended) 94
ASCII-Hex Space 50 (55**) Motorola 32 bit (S3 record) 95
ASCII-Hex Percent 51 (56**) Hewlett-Packard UNIX
ASCII-Hex Apostrophe 52 Format 96
ASCII-Hex SMS 57 Intel OMF 386 97
ASCII-Hex Comma 53 (58**) Intel OMF 286 98
RCA Cosmac 70 Intel Hex-32 99