User manual

Repair and Replacement Procedures
ProMaster 2500 User Manual 7-67
Seal, beam cylinder 265-8880-902 2
Seal, beam shaft 265-8880-901 1
Solenoid valve 289-0024-901 1
Solenoid, 4-way, 2500 289-0524-901 1
Standoff, tube guide 250-0612-902 3
Spring, .625” free length, .156” o.d. 265-2500-901 2
Spring, .875” free length, .312” o.d. 265-4415-901 3
Spring, .965” free length, .343” o.d. 265-4067-901 1
Spring, 1.468” free length, .375” o.d. 265-4420-901 1
Spring, 47/64” free length, .25” o.d. 265-2500-902 2
Spring, donut 265-4500-901 1
Switch, optic, collector, blue/yellow wires 815-1991-001 1
Switch, optic, emitter, red/black wires 815-1990-001 2
Switch, optic, super collector 815-1992-001 1
Timing belt, 140-tooth 264-0140-901 1
Timing belt, 280-tooth 264-0280-901 1
Tool, DeoxIT pen 570-5500-901 1
Tool, hex wrench set 565-0060-901 1
Tool, Molex pin extractor 497-0055-901 1
Tool, TriFlow lubricant 560-3300-901 1
Transfer roller 646-0053-001 1
Transistor, beam motor circuit 340-0740-001 4
Transistor, print head/solenoid 340-0611-005 1
Vacuum filter core 608-0008-001 1
Washer, spring finger, .344” i.d., .728: o.d., .006” t. 235-4485-901 1
Description Part Number Quantity