User manual

Repair and Replacement Procedures
7-64 ProMaster 2500 User Manual
33 290-3800-901 Bushing, 3/8 i.d., 5/8 o.d., 1/16 l. 5
34 220-0127-911 Screw, M3 x 8 mm, cap head 1
35 641-0019-001 Motor adapter shaft 1
36 265-0030-005 Dowel pin, 1/8” d. x 1/2” l. 10
37 234-0038-904 Flat washer, .37” i.d., .875” o.d.,
.062 t.
1
38 265-0034-005 Dowel pin, 1/16” d. x 1/2” l. 1
39 290-1438-903 Bushing, 1/4 i.d., 3/8 o.d., 3/8 l. 8
40 235-4485-901 Finger spring washer, .344” i.d.,
.728” o.d., .006” t.
2
41 265-4420-901 Wire spring, 1.468” free length,
.375” o.d.
1
42 220-0005-921 Screw, 2–56 x 3/8”, button head 2
43 234-0009-002 #2 flat washer, .096” i.d., .250” o.d.,
.015” t.
2
44 220-0100-911 Screw, 4–40 x 1/8”, cap head 1
45 220-0119-911 Screw, 4–40 x 1/4”, cap head 3
46 220-0113-002 Screw, 4–40 x 3/8”, cap head 25
47 220-0111-911 Screw, 4–40 x 3/4”, cap head 1
48 234-0004-901 #4 flat washer, .125” i.d., .281” o.d.,
.024” t.
6
49 220-0207-002 Screw, 6–32 x 3/8”, cap head 4
50 265-0315-902 Retaining ring for .187” D shaft 4
51 265-0014-901 Retaining ring for 1/4” D shaft 1
52 220-0302-911 Screw, 8–32 x 3/8”, cap head 4
53 284-5530-901 Flow valve 2
54 298-5500-901 Air cylinder, .71” o.d., .625” bore 1
55 265-0030-175 Dowel pin, 1/8” d. x 1-3/4” l. 1
56 641-0040-001 Ribbon drive shaft 1
57 641-0041-001 Clutch base shaft 1
58 604-0086-001 Slip disk 2
59 608-0013-001 Threaded-split hub 1
60 636-0086-001 Ribbon cover plate 1
61 604-0087-001 Clutch block 1
62 665-0015-001 Pulley assembly 1
63 604-0088-001 Rod end block 1
64 604-0089-001 Cylinder pivot 1
65 604-0090-001 Cylinder pivot block 1
66 636-0085-001 Thermal base plate 1
67 604-0042-001 Pivot roller block 4
68 641-1026-001 Spring shaft 5
69 636-0063-001 Platen cover plate 1
70 636-1293-001 Platen hinge 1
71 636-0062-001 Labeler track 1
Item
No.
Part
Number Description Quantity