User manual

Repair and Replacement Procedures
ProMaster 2500 User Manual 7-63
Item
No.
Part
Number Description Quantity
1 665-0028-001 Thermal print head 1
2 815-2059-001 Label advance motor 1
3 815-1991-001 Pulse collector optic 1
4 815-1990-001 Emitter optic 1
5 815-2015-001 Reflector pulse optic 2
6 280-0014-904 Roller bearing, 1/4” i.d., 1/2” o.d.,
.1875” t.
2
7 280-0316-902 Roller bearing, .1875” i.d., 3/8” o.d.,
.125” t.
10
8 280-0038-903 Roller bearing, 3/8” i.d., 7/8” o.d.,
.281” t.
5
9 615-1285-002 Pulley, 90-tooth 1
10 277-3318-901 Clutch 1
11 277-0048-901 Pulley, 48-tooth 1
12 815-1989-001 Microswitch actuator assembly 1
13 615-1628-001 Drive roller 1
14 280-3020-901 Roller, .188” i.d., /725” o.d., .5” t. 3
15 264-0280-901 Timing belt, 280-tooth 1
16 280-0018-901 Needle bearing, 1/8” i.d., 1/4” o.d.,
1/4” l.
3
17 220-2125-921 Screw, 2–56 x 1/8”, button head 4
18 220-0302-332 Set screw, 8–32 x 5/16” 2
19 265-8800-901 Collar, 3/8” i.d., 7/8” o.d., 3/8” t.,
for 6–32 screw
1
20 290-1416-901 Bushing, 1/4 i.d., 7/16 o.d., 1/16 l. 2
21 433-0693-001 Knob, for ProMaster 7000
installation kit
1
22 280-4000-901 Feed roller, .376” i.d., 1.293” o.d.,
.626” t.
1
23 815-2073-001 Electromagnetic clutch 1
24 280-0020-901 Bearing, .312” i.d., .750” o.d., .030” -
.032” t.
1
25 290-5610-901 Bushing, 3/16 i.d., 5/16 o.d., 1/4 l. 2
26 709-0418-001 Print head assembly 1
27 234-0032-901 Flat washer, .378” i.d., .563” o.d.,
.016” t.
1
28 234-0350-901 Wave spring washer, .265” i.d.,
.367” o.d.
5
29 234-0350-903 Wave spring washer, .350” i.d.,
.492” o.d.
1
30 234-0350-902 Wave spring washer, .650” i.d.,
.855” o.d., .010” t.
3
31 251-0080-906 Shim spacer, .187” i.d., .250” o.d.,
.031” t.
6
32 220-0032-223 Screw, 8–32 x 3/4”, shoulder 3