User manual

Repair and Replacement Procedures
ProMaster 2500 User Manual 7-55
Item
No.
Part
Number Description Quantity
1 249-0316-901 O-ring 3
2 249-0014-901 O-ring 6
3 234-0004-901 #4 flat washer, .125 i.d., .281 o.d. 4
4 220-0207-002 Screw, 6–32 x 3/8” l, cap head 2
5 234-0002-901 #6 flat washer, .156” i.d., .375” o.d. 3
6 220-0206 Screw, 6–32 x 3/8” l, button head 1
7 220-6005-911 Screw, 6–32 x 1/2, cap head 7
8 433-0006-901 #6 knurled knob 2
9 220-0119-911 Screw, 4–40 x 1/4, cap head 16
10 220-1187-921 Screw, 10–32 x 3/16, button head 1
11 234-0012-902 #10 flat washer, .125” i.d., .375” o.d. 1
12 220-2187-001 Screw, 2–56 x 3/16, cap head 20
12 220-2187-911 Screw, 2–56 x 3/16, cap head 20
13 249-3816-901 O-ring, .364” i.d. x .07” xsect 3
14 249-5816-901 O-ring, .614” i.d. x .07” xsect 1
15 249-7816-901 O-ring, .864” i.d. x .07” xsect 1
16 220-1187-911 Screw, 1–72 x 3/16, cap head 8
17 290-3800-901 Bushing, 3/8 i.d., 5/8 o.d., 1/16 l. 1
18 265-0038-901 Retaining ring 1
19 280-0014-906 Bearing, 1/4” i.d., 3/8” o.d., .25” t. 1
20 277-0048-901 Pulley, 48 tooth 1
21 264-0140-901 Timing belt, 140 tooth 1
22 265-0014-901 Retaining ring 1
23 280-0200-901 Bearing, 3/8” i.d., 1/2” o.d., 1/2” t. 2
24 235-4490-901 Washer, finger spring 1
25 280-0038-901 Bearing, .636 i.d., .875 o.d., .625 t. 4
26 284-4421-905 Tube connector 2
27 280-0025-901 Bearing, washer 2
28 265-8880-902 Seal, spring, .50” i.d., .75” o.d.,
.161” t.
2
29 220-0113-002 Screw, 4–40 x 3/8”, cap head 2
30 220-0113-921 Screw, 4–40 x 3/8, button head 2
31 289-0024-901 Solenoid valve, 24V, 3-port 3
33 288-3300-901 Vacuum sensor, 5V 1
34 615-1399-001 Pulley, 20-tooth 1
35 641-0013-001 Shaft, picker vacuum 1
36 604-0056-002 Beam body 1
37 636-0066-002 Beam bottom 1
38 636-0067-001 Beam top 1
39 645-0010-001 Cylinder sleeve 1
40 646-0042-001 Vacuum generator A 1
41 646-0043-001 Vacuum generator B 1
42 646-0044-001 Shuttle valve A 1