User manual

Repair and Replacement Procedures
ProMaster 2500 User Manual 7-51
Item
No.
Part
Number Description Quantity
1 250-0612-902 Stand off, tube guide 2
2 265-1875-105 Dowel pin, 3/16”d x 1-1/2” l 2
3 234-0009-002 #2 flat washer, .096” i.d., .250” o.d. 4
4 234-0002-901 #6 flat washer, .156” i.d., .375” o.d. 18
5 220-0100-911 Screw, 4–40 x 1/8, cap head 2
6 220-6005-911 Screw, 6–32 x 1/2, cap head 2
7 265-0030-625 Dowel pin, 1/8” d x 5/8” l 8
8 220-0006-911 Screw, 2–56 x 5/16, cap head 4
9 220-0119-911 Screw, 4–40 x 1/4, cap head 8
10 220-2005-911 Screw, 2–56 x 1/2, cap head 4
11 220-0170-931 Screw, 6–32 x 1/4, flat head 10
12 280-0038-902 Bearing, 3/8” i.d., .9/16” o.d., .14” t 1
13 280-3005-901 Pinch roller, small 2
14 290-4000-901 Bushing, .276” i.d., .44” o.d., 1/2” t 4
15 280-0014-905 Needle rollers bearing, 1/4” i.d., .437” o.d., .25” t 4
16 265-2500-901 Wire spring, .625 free length, .156 o.d. 2
17 265-4415-901 Wire spring, .875” free length, .312” o.d. 2
18 265-2500-902 Wire spring, 47/64” free length, .25” o.d. 4
19 604-1198-001 Tube clamp pivot 4
20 641-1199-001 Base clamp shaft 2
21 641-1200-001 Pivot clamp shaft 2
22 604-0115-001 Tube clamp 2
23 636-0130-001 Output camp late 2
24 604-0033-001 Track guide 4
25 641-0010-001 High plate track pin 2
26 641-0011-001 Low plate track pin 2
27 636-0058-001 Output motion plate 1
28 637-0017-001 Spring post, threaded 2
29 604-0108-001 Output tube clamp 2
30 604-0109-001 Output track, right 2
31 604-0110-001 Output track, left 2
33 622-4123-001 Cable 1
34 622-4124-001 Cable 1
35 815-1989-001 Microswitch actuator assembly 2
36 815-1990-001 Emitter optic assembly 2
37 815-1991-001 Pulse collector optic assembly 2
38 220-0113-002 Screw, 4–40 x 3/8” l, cap head 5
39 234-0004-901 #4 flat washer, .125” i.d., .281” o.d. 9
40 622-1305-001 Cable clamp, 3/16” i.d. 2
41 220-0100-331 Screw, 4–40 x 1/8” l, cup 2
42 636-0131-001 Tube adjust plate 2
43 265-0030-105 Dowel pin, 1/8”d x 1-1/2” l 4
44 220-0212-911 Screw, 6–32 x 3/4, cap head 2