User manual

Repair and Replacement Procedures
ProMaster 2500 User Manual 7-49
Item No. Part No. Description Quantity
1 250-0612-902 #6 spacer, .140” i.d., .250” o.d., .500” l 1
2 220-0212-911 Screw, 6–32 x 3/4, cap head 1
3 220-0113-002 Screw, 4–40 x 3/8”l, cap head 5
4 265-1875-105 Dowel pin, 3/16” d x 1-1/2” l 1
5 234-0009-002 #2 flat washer, .096” i.d., .250” o.d. 2
6 622-1261-901 Cable tie 2
7 622-1305-001 Cable clamp 1
8 234-0002-901 #6 flat washer, .156” i.d., .375” o.d. 9
9 622-1235-901 Cable tie 1
10 220-6005-911 Screw, 6–32 x 1/2, cap head 1
11 265-0030-750 Dowel pin, 1/8” d x 3/4” l 2
12 265-0030-625 Dowel pin, 1/8” d x 5/8” l 4
13 220-0006-911 Screw, 2–56 x 5/16, cap head 2
14 220-0119-911 Screw, 4–40 x 1/4, cap head 4
15 220-0119-931 Screw, 4–40 x 1/4, flat head 1
16 220-0170-931 Screw, 6–32 x 1/4, flat head 4
17 220-0100-331 Screw, 4–40 x 1/8” l, cup 1
18 280-0038-902 Bearing, 3/8” i.d., .9/16” o.d., .14” t 1
19 280-3005-901 Pinch roller 1
20 290-4000-901 Bushing, .376” i.d., >44” o.d., 1/2” t 2
21 280-0014-905 Needle rollers bearing, 1/4” i.d., .437” o.d., .25” t 2
22 265-2500-901 Wire spring, .625” free length, .156” o.d. 1
23 265-2510-901 Wire spring, 1.062” free length, .312” o.d. 1
24 265-2500-902 Wire spring, 47/64 free length, .25” o.d. 2
25 604-1198-001 Tube clamp pivot 2
26 641-1199-001 Base clamp shaft 1
27 641-1200-001 Pivot clamp shaft 1
28 604-0115-001 Tube clamp 1
28 604-0115-002 Tube clamp 1
29 636-0056-001 Cam track 1
30 604-0105-001 Input tube clamp 1
31 604-0033-001 Guide track 2
32 641-0010-001 High plate track pin 1
33 641-0011-001 Low plate track pin 1
34 636-0057-001 Motion plate 1
35 636-0131-001 Tube adjust plate 1
36 604-0107-001 Input track, right 1
37 604-0106-001 Input track, left 1
38 637-0017-001 Spring post, threaded 1
39 815-1989-001 Microswitch actuator assembly 1
40 815-1990-001 Emitter optic assembly 1
41 815-1991-001 Pulse collector optic assembly 1
42 622-4122-001 Cable 1
43 234-0004-901 #4 flat washer, .125” i.d., .281” o.d. 5