User manual

Introduction
1-6 3/97 ProMaster 2500 User Manual
RS-232 Ports
—Two serial ports are used to connect the 2500 with the PC
that is running TaskLink. A third port is available for running diagnostic
tests.
Features Under the
Hood
The hood covers the primary transportation and configuration features
on the 2500 as shown in Figure 1-5. These are described below in the
order in which they encounter a device traveling through the system.
Figure 1-4
External Features on the ProMaster 2500 (rear view)
Figure 1-5
Major Features Under the Hood
1759-2
POWER SWITCH
AIR INPUT
REMOTE RS232
PROGRAMMER RS232
HANDLER PORT
AC POWER
INLET
1760-3
CABLE HARNESS
GUIDE
BEAM HEAD
BEAM TRAVERSE
MOTOR
INPUT TUBE
HOLDER
TRACK WIDTH
ADJUSTMENT
KNOB
REAR CARRIAGE SHAFT
LEAD SCREW
FRONT CARRIAGE SHAFT
OUTPUT TUBE
HOLDER (1 of 2)
BEAM CARRIAGE
MAIN PLATE
LABELER
LABEL
APPLICATION
AREA
DEVICE RECESS
(2 of 2)
DEVICE RECESS (1 of 2)
LABEL SUPPLY
REEL
PROGRAMMING
STATION
E-STOP
BUTTON