User manual

Preventive Maintenance
ProMaster 2500 User Manual 5-45
Text Rotation
The 2500 displays:
Select a text rotation value and press
ENTER
.
Device Orientation in
Receiving Tube
The 2500 displays:
Use the arrow keys to move the pin 1 icon to match the position of pin 1
as the device enters the receiving tube. Press
ENTER
when you have
made your selection.
Tip: So that you can place devices back in the 2500 without repositioning them,
choose a setting that places devices in the receiving tube opposite their
orientation in the input tube.
Creating Label Text
The Temporary text file is ready to edit when the 2500 displays:
Any text on the left side of the display is from the last file edited and
COLUMN
X
and ROW
X
refer to the position of the cursor.
Figure 5-18
Recommended Orientation of Pin 1
for DIP and PLCC Devices
1 TEMPORARY FILE
SELECT POSITION OF PIN 1
TXT IN RELATION TO THE TEXT.
USE ARROW KEYS THEN PRESS ENTER.
<------- TEMPORARY FILE
SELECT POSITION OF PIN 1
AS IT WILL GO INTO THE TUBE.
1 USE ARROW KEYS THEN PRESS ENTER.
_ | TEMPORARY FILE
| COLUMN X ROW X
| PRESS STOP WHEN
| EDITING IS COMPLETE.
1
SQUARE
PLCC
1
DIP, SOIC
32-PIN PLCC
FRONT PANEL DISPLAY
IN INPUT TUBE
1256-2