User manual

Preventive Maintenance
ProMaster 2500 User Manual 5-31
Hood Interlock Key
A hood interlock key is provided with each handler to allow service
personnel to simulate a closed hood in order to run diagnostic tests.
When the key is in position, the 2500 detects a lowered hood and will
perform the solenoid and motor tests while the hood is raised. The hood
cannot be lowered fully into its operating position while the key is
installed.
Perform the following steps to install the key (see Figure 5-11).
1. Raise the hood while the 2500 is idle.
2. Insert the key into the hood interlock key hole.
3. Turn the key 1/4-turn clockwise to lock the key in position.
4. Select and run the desired diagnostic test.
Figure 5-11
Inserting the Hood Interlock Switch
2516-1