User's Guide

Telemetry Transmitter User Guide Appendix –

Compliance Statement

Part Number 000380-001 Rev 09

Thank you for purchasing DSI Telemetry Transmitters. DSI is required to provide this guide

because the devices transmit information using radiofrequency waves. It contains details on the

intended use of the transmitters, 1999/5/EC (R&TTE Directive) conformity, FCC compliance,

and proper transmitter disposal. Please read this guide carefully and retain for future reference.

For additional information on the product warranty, exchanges, and use, please visit

www.datasci.com.

Intended Use:

DSI Telemetry Transmitters are intended for measuring physiologic parameters in laboratory

animals. Transmitters range in size to accommodate a wide range of research animals and the

transmitter shape allows for subcutaneous or intraperitoneal placement.

Declaration of Conformity:

These transmitters conform to the requirements of 1999/5/EC (R&TTE Directive). The

declaration of conformity may be viewed on the Internet at www.datasci.com.

Use of 455 kHz devices may be subject to licensing in the following countries. For licensing

options please contact the national spectrum management authorities:

Italy

Use of 18 MHz devices may be subject to licensing in the following countries. For licensing

options please contact the national spectrum management authorities:

Belgium Greece Italy Slovak Republic Spain

Use of 868 MHz devices may be subject to licensing in the following countries. For licensing

options please contact the national spectrum management authorities:

Austria Greece Norway Spain Sweden Netherlands

FCC Statement:

FCC ID _

455 kHz Implant FCCID:MHA02DSI

These devices comply with part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference and (2) this device must accept

any interference that may cause undesired operation.

This Category II radio communication device complies with Industry Canada Standard RSS-310.

Ce dispositif de radio communication de catégorie II respecte la norme CNR-310 d’Industrie

Canada.

FCC ID IC ID _

8 MHz Implant FCCID:MHATMS1 IC:5681A-MHATMS1

18 MHz Implant FCCID:MHATMS2 IC:5681A-MHATMS2

These devices comply with Part 15 of the FCC rules and Industry Canada (IC) RSS 210.

Operation is subject to the following two conditions: (1) This device may not cause harmful

interference and (2) this device must accept any interference that may cause undesired operation.

PAGE 1
Telemetry Transmitter User Guide Appendix – Compliance Statement Thank you for purchasing DSI Telemetry Transmitters. DSI is required to provide this guide because the devices transmit information using radiofrequency waves. It contains details on the intended use of the transmitters, 1999/5/EC (R&TTE Directive) conformity, FCC compliance, and proper transmitter disposal. Please read this guide carefully and retain for future reference.
PAGE 2
Telemetry Transmitter User Guide Appendix – Compliance Statement 916 MHz Implant FCC ID FCCID: MHATRUDSI IC ID _ IC: 5681A-MHATRUDSI These devices comply with Part 15 of the FCC rules and Industry Canada (IC) RSS 210. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference that may cause undesired operation.