User's Guide

7 | P a g e

2. Tap the Navigation button on the upper left-hand side of the screen and select Settings.

3. Tap the Connect Receiver button.

4. A new screen will load with a list of PhysioDetect Receivers detected by the tablet. Select the receiver

with serial number desired to be connected to the tablet.

Note: The receiver serial number can be found on the sticker located next to the power port for the

PhysioDetect Receiver.

Now that a receiver is connected to the tablet, implants may be turned on and added to the PhysioDetect

Dashboard.

IMPLANT DETECTION

PhysioDetect may be used to verify implants are on after the magnet swipe and determine useful information

needed during the Ponemah software configuration process. Once implants have been detected, they may be

monitored in the Dashboard.