Technical data

CONTROL PANEL ETV 1961
08.07.2014 Page 33
Cleaning the Touch Screen
CAUTION!
Before cleaning the touch screen, the terminal must first be turned off to avoid
unintentionally triggering commands or functions!
ATTENTION!
Avant de nettoyer l'écran tactile, le terminal doit d'abord être éteint afin d’éviter un
déclanchement involontaire des commandes!
The terminal's touch screen can only be cleaned with a soft, damp cloth. To dampen the
cloth, a screen cleaning solution such as anti static foam, water with a mild detergent or
alcohol should be used. The cleaning solution should be sprayed onto the cloth and not
directly on the terminal. The cleaning solution should not be allowed to reach the terminal
electronics, for example, through the ventilation slots.
No erosive cleaning solutions, chemicals, abrasive cleansers or hard objects that can
scratch or damage the touch screen may be used.
If the terminal comes in contact with toxic or erosive chemicals, carefully clean the terminal
immediately to prevent acid damage.
To ensure the optimal function of the terminal, the terminal should be cleaned
regularly!
To extend the lifespan of the touch screen as much as possible, using the fingers to
operate the terminal is recommended.
Pour garantir le fonctionnement optimal du terminal, le terminal doit être nettoyé
régulièrement!
Pour prolonger la durée de vie de l'écran tactile on recommande d’utiliser les doigts
pour l’opérer.