Technical data

CONTROL PANEL ETV 1961
Page 24 08.07.2014
70
C-DIAS ERROR
An error occurred in connection with
a C-DIAS module.
Cause:
- The reason for this error is
documented in the log file
Solution:
- Depends on the cause
72
S-DIAS ERROR
A connection error with a S-DIAS
module has occurred.
Possible causes:
- real network does not match the
project
- S-DIAS client is defective
Solution:
- analyze logfile
95
USER DEFINED 0
User-definable code.
96
USER DEFINED 1
User-definable code.
97
USER DEFINED 2
User-definable code.
98
USER DEFINED 3
User-definable code.
99
USER DEFINED 4
User-definable code.
100
C_INIT
Initialization start; the configuration
is run.
101
C_RUNRAM
The LASAL project was successfully
started from RAM.
102
C_RUNROM
The LASAL project was successfully
started from ROM.
103
C_RUNTIME
104
C_READY
The CPU is ready for operation.
105
C_OK
The CPU is ready for operation.
106
C_UNKNOWN_CID
An unknown object from a stand-
alone or embedded object, or an
unknown base class was detected.
107
C_UNKNOWN_CONSTR
The operating system class cannot
be created; the operating system is
probably wrong.
108
C_UNKNOWN_OBJECT
Indicates an unknown object in an
interpreter program; more than one
DCC080 object.
109
C_UNKNOWN_CHNL
The hardware module number is
greater than 60.
b