Specifications

DIGITAL-LOGIC AG Geode LX800 Manual V1.1C
Driver, Software & BIOS Information
22
4.1.6. Windows XP 2
nd
IDE bug fix
Most PC-AT chipsets contain a dual IDE controller. The AMD Geode™ CS5536 and CS5535 companion
devices contain only a single IDE controller. These companion devices use the same out-of-box Windows®
XP IDE driver as other compatible chipsets.
This may present a problem, since the driver will assume a dual controller is present. The result is that
system resources may become reserved and unavailable for other devices. Install the following .reg file:
\drivers\LX800\IDE\XP Geode disable IDE2.reg
This reg file (XP Geode disable IDE2.reg) disables the second IDE controller in the XP OS.
The changes do not affect the performance of the IDE controller, but simply allow the resources to be used
elsewhere.
4.1.7. VideoIn
The VideoInput function (frame grabber) is available in conjunction with the MSB800, MPC21, MSEP800 and
optional on the MPCV800. The low cost version MSB800L and MSEP800L do not include this feature.
The Geode LX800 contains a low cost video input port. It consist of LX800’s video input port (VIP) and the
external frame grabber chip SAA7111A. This port is capable of digitizing a CVBS video signal with 15 frames
per second at a resolution of 352x288bits. Note that this frame rate is only achievable when the raw data
stream is compressed before being stored on the hard drive. Driver support is currently available for the
Windows XP platform.
With higher resolutions, the framerate will decrease.
Resolution: Frames per second Remarks
352 x 288 15
Run the VidInpLX800 installer. The video input can be tested with the amcap application.
Note...
For video input, preview must be selected.