Specifications

TME-104-CLR-LX800-R1V3.doc Rev. 1.3 1(53)
1 Overview
1.1 Introduction
The Cool LiteRunner-LX800 (CLR-LX800) is a PC/104 board with AMD’s Geode™ LX processor and
has a very good performance- power- ratio. The board comprises all peripherals needed for an
embedded PC on a small 3.775" by 4.050" printed circuit board. On the top side it is fully plug-in
compatible with the Cool LiteRunner 2.
The CLR-LX800 integrates a powerful yet efficient AMD Geode™ LX800 processor together with a
CS5536 I/O companion and a Super I/O chip to form a complete PC, with all the standard
peripherals already onboard. There is a graphics controller with VGA and LVDS adapters to connect
different sorts of display terminals. Backlighting is provided for LCD modules too.
Two fast 100/10BaseT Ethernet ports, two RS232/RS422/RS485 serial ports, one RS485/ IrDA serial
port and four USB 2.0 host ports handle the communication with external devices. There are PS/2
connectors for keyboard and mouse as well as a parallel printer port available. An IDE ATA100
adapter allows connection of hard disk or CD drives. Applications that require non-moving storage
can use a plugged compact flash in a mounted socket which is connected to the ATA-controller.
System expansion can easily be realized over PC/104 and I²C bus connectors.
The CLR-LX800 is powered by a 5V-only supply and supports ACPI, advanced power management
and PCI power management. Security critical applications take advantage of the Geode LX
processor, too. It has an on-chip AES 128-bit crypto acceleration block capable of 44 Mbps
throughput on either encryption or decryption. The AES block runs asynchronously to the processor
core and is DMA based.
The CLR-LX800 runs DOS, Windows, Linux and VxWorks operating systems.
Features
CPU
• AMD Geode™ LX 800@1.0W (500MHz)
• Cache Memory with:
• 64 KB/64 KB level 1 I/D caches
• TLB (Translation Look-aside Buffer):
• 128 KB level 2 cache
• Efficient Prefetch
Main Memory
• soldered 256MB DDR400
Chipset
• AMD CS5536 companion device
Extension slots
• 1 x 16-bit PC/104 with full DMA capability
• 1 x Mini PCI Slot
Interfaces
• 2 x Ethernet 10/100BaseT
• Compact Flash Type III header
• ATA-6 EIDE (Ultra DMA-100)
• PS/2 Keyboard/Mouse
• AC97 Audio ports
• 4 x USB 2.0 ports
• 1 x RS485/IrDA port
• 2 x RS232/RS485, software selectable
• 1 x parallel port
• SVGA monitor
• 18 Bit Flat Panel
• 18/24 Bit LVDS for displays
• MISC signals:
external power button, I²C bus, speaker,
external reset button, hardware monitoring
and general purpose signals external
battery connector
• Power supply
Other configurations are possible at high volumes.