Specifications

TME-104-CLR-LX800-R1V3.doc Rev. 1.3 16(53)
Flat Panel and LVDS Configuration
Flat panel and LVDS have the same display options as shown in the table:
Setting Possible Values
Flat Panel Type Auto, TFT, LVDS
Resolution 320x240, 640x480, 800x600, 1024x768,
1152x864, 1280x1024, 1600x1200
Data Bus Type 18/24 Bits, 2ppc
Refresh Rate 60 70, 72, 75, 85, 90, 100 Hz
HSYNC Polarity High, Low
VSYNC Polarity High, Low
LP Active Period
Active Only Æ only active during SYNC
Free Running Æ always active
SHFCLK Active Period
Active Only Æ only active during SYNC
Free Running Æ always active
To ease usage of these displays it’s possible to select the display and backlight supply voltages with
the onboard voltage selector jumpers. (Jumper LVDS and Backlight, see below)
Flat Panel Connector 18 Bit
Connector type IDC30 pin header 2.00 mm
Pin Signal Pin Signal
1 GND 2 DOTCLK
3 HSYNC 4 VSYNC
5 GND 6 R0
7 R1 8 R2
9 R3 10 R4
11 R5 12 GND
13 G0 14 G1
15 G2 16 G3
17 G4 18 G5
19 GND 20 B0
21 B1 22 B2
23 B3 24 B4
25 B5 26 GND
27 EN 28 VLCD-SW
29 VLCD-SW 30 GND