Specifications

TME-EPIC-HURLX-R3V5.docx
Rev 3.5
Page 42 of 49
Trouble Shooting BIOS Settings
It may happen that the BIOS is configured in a way that the Hurricane-LX800 does not start at all. To repair this,
the default values of the BIOS can be automatically loaded at boot time. To load these, the power must be
switched on and off again within 2 seconds. This sequence must be repeated 5 times, then the default values get
loaded by the BIOS.
Pressing the Reset-Button five times while the system is booting achieves the same result.
4.2 Drivers
Software drivers for sound, Ethernet, AES and graphics adapter are available for the Hurricane LX800. These
drivers can be downloaded from LiPPERT's website http://www.lippertembedded.com. For installation, follow the
instructions on the driver disks.
2s
Power
On
Off
lllllrhhfllrhhfllrhhfllrhhfllrhh