Specifications

TME-EPIC-HURLX-R3V5.docx
Rev 3.5
Page 39 of 49
ISA I/O and Memory Configuration allows setting the board’s ISA memory and I/O map.
By default the following I/O and Memory Ranges are mapped to ISA and NOT accessible for other devices any
more:
I/O: Range-0: 100h-17Fh
Range-1: 180h-1BFh
Range-2: 1C0h-1DFh
Range-3: 200h-27Fh
Range-4: 300h-33Fh
Range-5: 340h-35Fh
Memory: Range-0: C8000h-CFFFFh
Range-1: D0000h-DFFFFh
If a PCI device (e.g. on an external adapter) needs some of this ranges, the space has to be freed, because the
system is NOT Plug and Play! Otherwise if an external ISA card needs additional I/O or Memory space, the above
ranges need to be reconfigured.
Note:
You need to know exactly the resources that are needed by external cards
in order to setup the BIOS correctly! Otherwise it may happen that some
cards do not work properly!