Specifications

TME-EPIC-HURLX-R3V5.docx
Rev 3.5
Page 33 of 49
3.27 uDOC Header (J16, Top)
Connector type: IDC10 pin header 2.54 mm
Matching part:
uDOC 2.54 mm
IDC10 pin female connector 2.54 mm
2.54 mm jumper
Pin Signal Pin Signal
1 +5 Volts 2 NC
3 USB2- 4 USB2_CON-
5 USB2+ 6 USB2_CON+
7 GND 8 NC
9 KEY 10 NC
When DOC is not used, jumper pins 3 to 4 and 5 to 6 using a 2.54mm Jumper (default).
3.28 Fan Header (J11, Top)
The Hurricane LX800 provides a connector to power a system fan, if the if the environment needs additional
cooling. The output voltage is minimum +3 Volts and is regulated to the temperature of the CPU.
Connector type: AMP-640456-3Pin
Matching connector:
Pin
Molex 2.54mm (.100") Pitch KK® Crimp Terminal Housing, 3 Circuits
Signal
1 Speed Signal from fan (yellow)
2 +5 Volts (red)
3 GND (black)