Specifications

TME-104P-CSR-LX800-R1V11.doc Rev 1.11 22 (50)
USB 2.0 Connector 0
Connector type: IDC10 pin header 2.54 mm
Matching connector: IDC10 pin female connector 2.54 mm
USB 2.0 Connector 1/2/3
Connector type: IDC12 pin header 2.54 mm
Matching connector:
IDC12 pin female connector 2.54 mm
Pin
Signal
Pin
Signal
1 VCC_USB1
8
2 USB-GND
3 USB1+ 4 USB1-
5 VCC_USB2
8
6 USB-GND
7 USB2+ 8 USB2-
9 VCC_USB3
8
10 USB-GND
11 USB3+ 12 USB3-
8
0.5 A is the maximum current for that pin; power supply will be switched off in standby mode
Pin
Signal
Pin
Signal
1 ETH1-TX+ 2 ETH1-TX-
3 ETH1-RX+ 4 SMB_DATA
5 SMB_CLK 6 ETH1-RX-
7 USB0+ 8 USB0-
9 VCC_USB0
8
10 USB-GND
X8
X9