User manual

Publication AG-UM008C-EN-P - February 2005

Configuring Enhanced PLC-5 Processors 2-29

Figure 2.8 Example of a PLC-5 Write MSG to an SLC 500 or MicroLogix Processor

This MSG example tells the PLC-5 master station to write the

information from its N15:1 through its serial port (channel 0) to the

SLC 500 slave station 13

(15

). The data’s destination is N7:0 of the

SLC 500 slave station.

Ladder Rung

Control Block

MSG being sent to an SLC 500

or MicroLogix processor.

MSG being sent out channel 0

(must use MG file type).