User manual

Publication AG-UM008C-EN-P - February 2005
Worksheets D-7
Worksheet 2.3
Enhanced PLC-5 DF1
Half-Duplex Slave Station
Configuration
Use this worksheet to record your station’s configuration. Do not write
on the original. For descriptions of each line item, see page
2-12.
Page 1 of 1
Tab Parameter Example Your Configuration
Serial Port Remote Mode Change DISABLED
Diagnostic File N19
Baud Rate 9600
Bits Per Character 8
Stop Bits 1
Control Line HALF DUPLEX WITHOUT
CONTINUOUS CARRIER
Parity NONE
Error Detect CRC
Options Station Address 2
DF1 Retries 3
Detect Duplicate Messages ENABLED
RTS Send Delay (x 20 ms) 0
RTS Off Delay (x 20 ms) 0
ACK Timeout (x 20 ms) 15
MSG Application Timeout
(x 30 sec)
1