User manual

Publication AG-UM008C-EN-P - February 2005
11-6 Remotely Program Allen-Bradley Processors Over a Telemetry Network
Figure 11.8 RSWho Browse to Channel 0, DF1
Right-click on this Channel 0, DF1 network and select Properties.
Under Browse Addresses, enable the Browse only the specified
addresses box and enter in the range of addresses to browse.
Figure 11.9 Setting Range of DF1 Addresses to Browse
Now, left-click on the Channel 0, DF1 network to begin browsing this
range of DF1 addresses.
Figure 11.10 RSWho Browse Using SLC 5/05 Passthru
IMPORTANT
SLC 5/05 passthru does not work with the RSLinx
AB_ETHIP EtherNet/IP driver.