User manual

Publication AG-UM008C-EN-P - February 2005
5-6 Configuring SLC 500 Processors with 1747-KE Interface Modules
Parameter Selections
Node address Select a unique address of the module on the DH-485 network.
Maximum node
address
Choose the highest address on the DH-485 link. The default is
31.
Message
timeout
Choose an amount of time to wait for a response to a message
sent on the DH-485 network before the node errors out the
message.
Pass through If you want diagnostic commands:
• executed by the module, choose Disabled.
• passed through to the destination node, choose Enabled.
Baud rate Set all devices on the DH-485 network to the same baud rate.