User manual

Publication AG-UM008C-EN-P - February 2005
Configuring SLC 5/03, 5/04, and 5/05 Processors 4-19
Use Worksheet 4.2 (page D-15) for an example configuration and to
record your station’s configuration.
2. Define the location of the
diagnostic file used for
Channel Status here. For
Channel Status details, see
page 4-16.
3. On the Channel 0 tab, choose
DF1 Half-Duplex Master for
your Driver.
4. Choose a Message-based
Polling Mode.
5. Configure the communication
driver characteristics
according to Table 4.4.