User manual

1 Publication AG-UM008C-EN-P - February 2005

Chapter

Configuring SLC 5/03, 5/04, and 5/05

Processors

Chapter Objectives

This chapter helps you set up an SLC 5/03, 5/04, or 5/05 processor as

a master station, as a slave station, as a radio modem station, or as a

station on a point-to-point link.

For information about See page

an overview of the tasks required to configure an SLC 5/03, 5/04, or

5/05 processor

4-2

installing the processor 4-2

using modems that support DF1 communication protocols 4-3

modem control line operation 4-5

configuring DF1 half-duplex channel 0 parameters 4-8

configuring the processor as a DF1 half-duplex master station using

standard communication

4-10

configuring the processor as a DF1 half-duplex master station using

message-based communication

4-18

configuring the processor as a slave station 4-22

configuring channel 0 poll timeout 4-25

configuring the processor as a radio modem station 4-27

configuring the processor for point-to-point communication 4-33

the types of messages you can send from an SLC 5/03, 5/04, or 5/05

processor to another processor; how to configure the MSG

instruction and some configuration characteristics

4-37

example MSG control blocks 4-43