User guide

DATA-LINC GROUP
28
PN 161-09889-001B
rev 3/2005 ver 6.33c
PLR580D / DA User Guide
(4) RF Data Rate
For PLR580 use the user should not change this parameter.
Note: The RF Data Rate setting must be identical for all units in the system. Any radio modem with a different
RF Data Rate than the master will not establish a communication link.
(5) RF Xmit Power
The PLR580 offers users the ability to modify the Transmission Power of the radio modem. There are 10 power
settings available (1-10) which are roughly linear. Therefore a setting of 10 is full power (or 200 mW) and 1 is 10%
power (or 20 mW). The following guidelines should be followed when setting the RF Transmission Power:
Table 6: Power Transmit Settings
(6) Remote Security
For PLR580 use the user should not change this parameter.
(7) RTS to CTS
For PLR580 use the user should not change this parameter. Leave it disabled (0).
(8) Retry Time Out
For PLR580 use the user should not change this parameter.
gnitteS leveLrewoP nehWdesU
3-1woL
ehtnihtiwgnitareposmedomoidarfosriapforiaP
.smoorgninojdaroemas
6-4muideM
gnitareposmedomoidarforiapenonahteroM
.ytilicafemasehtihtiw
01-7lluF.ytilicafadnoyebgnidnetxenoitarepolamroN