User guide

6
PN 161-09981-007A
January 2010
Wireless I/O Extender User’s Guide
Hardware Overview
Side Panel
•Power Connector with 2 pin terminal connector, positive on the right
•Antenna Connector with standard thread SMA connector
Top Panel
-LED Indicators
LED Indication Note
Power Modem Power Should be on (red) at all times
RF CD Radio Carrier Detect In all congurations this LED should be on (orange) except
for Multi-Point Master where it will be off unless a Repeater
or Remote is sending data to the Master.
RF Out Radio Transmitting Data Should ash (yellow) when modem is transmitting data
RF In Radio Receiving Data Should ash (green) when modem is receiving data
Status Communication Status A Solid or Blinking (red) LED indicates Limited or No Com-
munication.
-Discrete and Analog Ports
•9 pin Contact Closure Input and Output
•9 pin Analog Input and Output