User guide
5
Wireless I/O Extender User’s Guide
PN 161-09981-007A
January 2010
Applications
The Wireless I/O Extenders are designed for point-to-point or point-to-multipoint wireless extension of wired sensors or
input and output controls. The system consists of one master unit and at least one remote unit, but can have up to 8
remotes. The master unit has 8 discrete inputs that are shared with the remote(s) and the discrete outputs are merged
togeather (OR’d) from the remote(s). The Discrete and Analog Wireless I/O Extenders have 8 analog inputs and outputs;
these channels are assigned to a specic remote.
Installation
Unpacking the Hardware (System)
•Discrete (and Analog) Wireless I/O Extender (At least 2 are needed for a system)
•120 VAC Wall Transformer (US Power Connector)
•6-Pin Min-Din to DB9 Cable for programming (1 per system)
•CD with Conguration Software and Manual
•Quick Start Guide
•Test Antenna
The equipment was carefully packaged to prevent shipping damage. It should be free from any defect, electrical
or mechanical, and in good operating condition. If your package contents are damaged or missing, please
contact your place of purchase immediately.
Point to Point
Point to Multipoint