User guide

25
Wireless I/O Extender User’s Guide
PN 161-09981-007A
January 2010
Select option “4”
The Show Radio Statistics menu should appear:
Shows the radio statistics.
The different between the Signal and Noise in J units should be a minimum separation of 20 for a reliable
RF communications.
Note: The modem statistics are discussed further in Appendix D.
Press “ESC” to return to the Main Menu.
Select option “5”
The Edit Multipoint Parameters menu should appear as seen below:
MODEM STATISTICS
Master-Slave Distance(m) 0001779
Number of Disconnects 1
Radio Temperature 23
Antenna Reflected Power 81
Transmit Current (mA) 0430
Local Remote1 Remote2 Remote3
J dBm dBm dBm dBm
Noise 68 90
Signal 94 66
Rate % 98
000000
Press <Ret> for Freq Table, <Esc> to return to main menu
MULTIPOINT PARAMETERS
(0) Number Repeaters 0
(1) Master Packet Repeat 3
(2) Max Slave Retry 3
(3) Retry Odds 3
(4) DTR Connect 0
(5) Repeater Frequency 0
(6) NetWork ID 0255
(7) Reserved
(8) MultiMasterSync 0
(9) 1 PPS Enable/Delay 255
(A) Slave/Repeater 0
(B) Diagosics 0
(C) SubNet ID Disabled
(D) Radio ID Not Set
(E) Local Access 0
(F)
(G) Radio Name
(Esc) Exit to Main Menu
Enter Choice