User`s guide

DL-WINDOWS™ V4.0 USER'S GUIDE 47
AL-DTM-III Features
Expanded Memory Capabilities
Allows for accounts of up to 2000 doors
Can hold up to 200 PDL3000 / PDL3500 model
locks, or up to 1000 DL3000 / DL2800 model locks.
Receive Event Logs of up to 5000 lock events.
Full programming support--Send/Receive all 2000
Users for PDL series locks.
Foreign Language Support*
Door Select Feature* - The need to program a door
number into the lock--before AL-DTM/Lock
communication--is no longer required. Simply select
the door number on the AL-DTM and proceed with
the transfer. (The AL-DTM cannot change door
numbers).
"Cold Start" Capability* - Clear all data from
memory without removing the battery.
*
See page 25 for AL-DTM configuration options.
AL-DTM Specifications
Power
Requirements:
(1) 9 Volt Alkaline Battery--Duracell
MN1604 or equivalent
Battery Life: Standby Mode: 60 Hours
Operating Temperature:
0 - 49ºC (32-122ºF)
Dimensions:
7.5” x 4” x 1.5” (H x W x D)
Sleep Mode: 1 Year
1. PC-COMM Mode
(DL-Windows/AL-DTM Communications)
Transfer multiple lock programs from DL-Windows
to AL-DTM
Receive multiple lock logs or lock programs stored
in the AL-DTM back to DL-Windows
2. LOCK Mode
(AL-DTM/Lock Communications)
Transfer lock program from the AL-DTM to a
specific lock
Receive specific lock log or program from the lock
back to the AL-DTM
Note: Transferring Event Logs (from the AL-DTM or DL-
Windows to the lock) is not possible. Event Log data is
read only.
AL-DTM Basic Modes of Operation
AL-DTM - Data Transfer Module
Data Transfer Modules allow the transfer of lock programs and other data between DL-Windows
software and Alarm Lock locking devices. Currently, the latest software inside Alarm Lock’s Data Transfer
Modules is AL-DTM-III, and this version software (or later) is used exclusively with DL-Windows 3.5.X (or
later). Previous versions of DTM software exist; the oldest AL-DTM version is no longer supported, and the
AL-DTM-II version must be upgraded and/or configured for AL-DTM-III operation (see WI1428 for upgrade
instructions, or WI1443 for AL-DTM-III configuration instructions.
The improved AL-DTM-III software allows for more locks to be stored per account, both within DL-
Windows and within the AL-DTM-III itself.
AL-DTM Specifications