User`s guide
4 DL-WINDOWS™ V4.0 USER'S GUIDE
DL3000 / DL2800
300 User Codes, 150 Schedules, 1600 Audit
Trail Events. Refer to OI224 for more
information on DL3000 features.
DL-Windows also supports the similar
DL2800, which supports 200 Users.
DL3500 / ETDL / ETPDL
DL3500: 300 User Codes, 500 Schedules,
40,000 Audit Trail events. Refer to WI1005
for more information on DL3500 features.
ETDL: 2000 User Codes, 500 Schedules,
40,000 Audit Trail Events. ETPDL adds Prox
capability
PDL3000 / PDL3500
2000 User Codes/ProxCards
®
or ProxKey
®
keyfobs, 500 Schedules, 40,000 Audit Trail
Events. Refer to WI1021 for more information on
features. DL-Windows also supports the similar
PDL3500 mortise lock.
Infrared Printer (AL-IR1)
An AL-IR1 printer is used to print Audit Trails
and User Code lists (where used) without the
need for a PC. Its infrared reader means no
cable connection to the lock is needed. Not
for use with Networx
™
series locks or devices.
Prox Card Reader/Enroller (AL-PRE)
An AL-PRE is used to quickly enroll multiple
ProxCards
®
and ProxKey
®
keyfobs into DL-
Windows. Use the supplied 9-pin DB9 to DB9
serial cable to connect the AL-PRE to your com-
puter’s serial COM port. Compatible with most
HID ProxCards
®
and ProxKey
®
keyfobs (37 bits
or less). For PDL series proximity locks only.
ProxCard
®
/ ProxKey
®
Keyfob
Compatible with most HID ProxCards
®
and
ProxKey
®
keyfobs (26-37 bits).
Note: ProxCard
®
and ProxKey
®
are trademarks of the HID
©
Corporation.
HID
HID CORPORATION
Double-ended Mini Banana Plug Connector (supplied)
After you create the program in DL-Windows and transfer the program from your computer to an AL-DTM,
transfer the program from the AL-DTM to the lock(s) via a double-ended mini banana plug. You can also
use this cable to transfer the Lock Program from your lock to an AL-PRE.
DB9 to DB9 Serial Cable (supplied)
Enroll ProxCards quickly into DL-Windows, then transfer this new ProxCard
®
data from the computer to the
AL-PRE via this 9-pin DB9 to DB9 serial cable. Once the data is in the AL-PRE, you can transfer the data
to the lock via the double-ended mini banana plug (see above), thus avoiding the need to use an AL-PCI2
cable for this process.
AL-PCI2 Cable
An ALARM LOCK AL-PCI2 cable is required to communicate between your computer’s RS-232 serial commu-
nications port (COM 1-4) and the AL-DTM or lock. One end of the AL-PCI2 cable is designed to be plugged
into a DB-9 male 9-pin serial COM port. If your computer has a 25-pin COM port only, a 25-pin to 9-pin adapter
must be used. The other end of the AL-PCI2 cable features a 2-pin banana plug connector which is polarity
sensitive--the TAB (marked “GND”) side must be plugged into the lock’s black (left) terminal.
DK3000 / PDK3000
Relay-only locking device, 2000 Users, 500
schedules, 40,000 Audit Trail events. The
PDK3000 adds Prox capability.
DL / PDL4100 ("Privacy")
DL / PDL4500 ("Residency")
The "Residency" feature is specially designed
to prevent unintentional lock-out, and the
"Privacy" feature is designed to deny access
to other users after an individual enters. Refer
to WI1194 and WI1195 for more information.
All supported locks:
• DL1200
• DL1300
• DL2800
• DL3000
• DL3200
• DL3500
• DL4100
• DL4500
• DK3000
• ETDL
• PL3000
• PDL1300
• PDL3000
• PDL3500
• PDL4100
• PDL4500
• PDK3000
• ETPDL
• PDL6100
• DL6100
• PDL6500
• DL6500
• PL6100
• PL6500
• ETPDLN*
• ETDLN*
• ETPLN*
• NETWORX-
PANEL*
Data Transfer Module (AL-DTM)
The AL-DTM allows the transfer of Lock
Programs and other data between DL-Windows
and locks. See page 47 for detailed AL-DTM
specifications and feature descriptions.
Note: For DL-Windows versions 3.5 or higher,
the AL-DTM-III must be used, but will be referred
to as simply the "AL-DTM" in this manual. Not
for use with wireless Networx
™
series locks or
devices.
Supported Products
*See OI352 for more information regarding the wireless Networx
™
system, its supported locks and features.