User`s guide

28 DL-WINDOWS™ V4.0 USER'S GUIDE
7. Retrieve Additional Lock Logs by repeating Steps 4 through
6 for each lock Log to be retrieved.
8. Reconnect the AL-DTM to the DL-Windows PC (using the
AL-PCI2 cable) to retrieve the Event Logs from the AL-
DTM. On the DTM Support screen, click Receive Data From
the DTM for Selected Locks to receive the Event Logs stored
in the AL-DTM.
The AL-DTM status window indicates successful
communications.
9. View Logs Received From the AL-DTM. Open the Event
Log Viewer screen for each lock Log.
The AL-DTM can be programmed to receive the program from the
locks. Receiving the program can be a useful tool to monitor addi-
tions or changes made at the lock as well as import locks into a
new DL-Windows account.
The procedure for receiving the program from the lock with the AL-
DTM is similar to receiving logs. Click in the DTM Function col-
umn for the selected lock, click the down arrow and select the
"Receive Program" Function in the pull-down menu. Follow the
same procedures in the section above to program the AL-DTM
and retrieve data from the lock.
Refer to Receiving Data from the Lock on page 23 for more infor-
mation.
After all lock programming has been completed, the AL-DTM can
be easily re-configured to retrieve event logs.
1. In DTM Support screen click in the DTM Function column for
the selected lock, click the down arrow and the pull-down menu
will display. Select the "Receive Log" Function.
Multiple locks can be programmed to receive logs by right click-
ing in the DTM Function column and select "Change All to
'Receive Log."
2. Transfer the Configuration to the AL-DTM. Connect AL-DTM
to the DL-Windows PC (using the AL-PCI2 cable) then click
Program DTM for Selected Locks to transfer the new
configuration to the AL-DTM.
The following window will display:
3. Enter PC Comm mode. On the AL-DTM, press the green
button and the following will display on the AL-DTM:
Unplug the AL-DTM.
The AL-DTM is now ready to retrieve event logs from the locks.
4. Connect the configured AL-DTM to the Lock using the dou-
ble-ended banana plug cable, observing tab direction.
5. With the AL-DTM in "Lock Mode", enter the User 299 User
Code at the lock keypad. The AL-DTM will briefly display a
message that it is "Analyzing Lock" and then will display the
following:
6. Re-Enter User 299 User Code at the lock keypad.
The AL-DTM will display the following:
Comm. Complete,
07/24/06 02:08PM
Lock’s time and
date, updated.
0993 FREE
MEMORY BLOCKS
Door 0001, Read
LOG Packet 001
PC COMMUNICATION
IN PROGRESS.
0993 FREE
MEMORY BLOCKS
COMM. COMPLETE,
07/24/06
Receive Event Logs with the AL-DTM
Re-enter 299
Code to Continue
Typical Event Log
Receiving Program with the AL-DTM