User`s guide

18 DL-WINDOWS™ V4.0 USER'S GUIDE
6. Select the Prox card type from the “Card Type” drop down
box.
Card Type Dropdown Box:
There are a few pre-existing Card Types. If your Card Type is
not listed or is unknown, select the “Unknown” type. Selecting
"Unknown" will allow you to enter your card into the system and
then assign a badge number (for tracking purposes only) in the
Global Users screen. Note that this feature is only supported
when the AL-PRE is connected to the computer.
7. Place a ProxCard
®
or ProxKey
®
keyfob in front of the area of
the AL-PRE labeled "Badge Target" until you hear two quick
beeps. The ProxCard Enrolling dialog closes and the
ProxCard
®
Data fields in the Global Users screen become
populated, indicating the Prox device has been enrolled for
that User (see below image).
Notice that in the Global Users screen, those Users listed in
the User Name and Pin No. columns with Prox information
are tinted yellow.
Note: If a previously enrolled ProxCard
®
or ProxKey
®
key-
fob is presented a second time for enrollment, a popup
warning appears similar to the image shown below.
In the Global Users screen, highlight the User you wish to edit by
clicking the "►" arrow to the left of the User Name, press Re-
move Card to remove ProxCard
®
or ProxKey
®
keyfob data.
Note: All proximity information for the selected User will be re-
moved from all locks in the Account. When the warning dialog ap-
pears, press Yes to delete the proximity information.
Note: Before entering data, we recommend you know all of the at-
tributes of the proximity credential (card and/or fob) including the
Format, Card Code and Facility Code, etc.
In the Global Users screen, in the ProxCard Data area, click the
Add Cards button. The ProxCard Enrolling dialog opens (below).
To manually add proximity information, first uncheck Enable AL-
PRE. The Card Code, Facil-
ity Code and other fields be-
come active, as shown in the
image below:
If you choose to add the Prox-
imity data manually, you will
need to know the card format,
badge number and Facility
Code. DO NOT GUESS AT
THE CARD TYPE! The data
entered will be used by the
system. Data entered and
accepted by the system does
not mean that the data is veri-
fied as correct. To verify you
have selected the correct card
type, perform the following verification procedure:
Prox Card Verification Procedure
NOTE: You will need an AL-PRE in order to complete the verifi-
cation process.
Manually enter the card information for your selected card type, then
click Build Card. The Prox Card Enrolling dialog closes and the
Global Users screen opens with your Proximity card information
populated. Using the AL-PRE, perform a search with your newly
enrolled card. In the Search pull-down box select “Prox Card (AL-
PRE Needed)” and present the card to the AL-PRE enroller. If your
card is found, then the entered data is correct. This process may be
performed for all Proximity card types and serves as a means of
verifying your entered data.
Sequential Add
In the DL-Windows Global Users screen, in the ProxCard Data
area, press the Add Cards button. The Prox Card Enrolling dialog
opens.
When adding Proximity information with known Card Numbers in a
sequence, select the Sequential Add check box. Sequential Add is
supported when using the AL-PRE or when entering the data manu-
ally.
In the Number of Cards dialog, enter the number of cards you will
to add sequentially, and click OK. The cards will be added starting
with the first User selected when the ProxCard Enrolling dialog
was first opened. The first card added will display the Card Type,
Card Number and Facility specified, and each subsequent card will
contain the same data except the Card Number will be incremented
by 1. Notice that in the Global Users screen, those Users listed in
the User Name and
Pin No. columns with
Prox information are
tinted yellow.
Remove Cards
Add Prox Information--Without the AL-PRE
(continued)
CNT36bit
38276
1
Prox information
added for Dave Block